1. User requirements are implemented within 1 hour. 

2. Personnel for product maintenance service are in place within 24 hours.

3. Free warranty of the equipment is 1 year.

   Key parts: Free warranty of wallboard, bottom table, upper table, moving table, crankshaft, worm gear, worm, etc. are 2 years.

4.Lifetime maintenance service for the equipment.

1. The training of JB-1050AG and UV curing, automatic paper take-up machine is mainly completed in the process of installation, commissioning and trial operation. The whole process takes about 3 days; there is another 2 days left for actual operation by the demanding operator. Party trainers only provide on-site guidance;
2. Before printing, training on screen stretching, coating, plate making, printing, etc. will be completed in an additional day if the demander has no professional staff; for the problems that may arise in these processes, there are many reasons that cannot be encountered one by one. If you arrive or explain, you need to do telephone or other training and guidance when the demanding operator actually operates in the future;

1. Before the equipment arrives at the buyer’s factory, the buyer must prepare the space required for the installation/operation of the equipment according to the overall size drawing provided by the supplier;
2. Before the equipment arrives at the buyer's factory, the buyer must prepare the equipment power and gas source required for the installation/operation of the equipment according to the power supply, gas source specifications and location map provided by the supplier;
Note: JB-1050AG and JB-1050UVJG are not equipped with power cords, and the buyer’s factory must prepare in advance. The main power cord of JB-1050AG is a 5-wire system of 6m², and the JB-1050UVJG is a 5-wire system of 10m². Dimension drawing and factory actual self-determination, JB-1050SG standard power cord 5×Φ2.5 m㎡, length 3 meters, if the size drawing and the actual length of the factory are not enough, please replace it by the factory.
3. After the equipment arrives at the purchaser's factory, the purchaser shall be responsible for preparing personnel and equipment for unloading and moving to the prepared installation location;

1. The open space required for installation/operation of the equipment shall be based on the overall size drawing or the size and appearance provided by the supplier
2. Power and gas source for equipment
According to equipment specifications or according to the power supply provided by the supplier, air source specifications and location diagrams​​
Standard configuration with external coaxial Ф8 air pipe, except JB-1020A gas pressure specification is 5.5Kg / CM2 (0.55Mpa), others can be replaced with 4.0Kg / CM2 (0.4Mpa);
3. Power cord for equipment
According to equipment specifications or power cord specification table, the length is according to the actual factory